Below are the dip-switch found in MAME for this Print Club 2 Vol. 8 Summer (J 970616 V1.100) romset.
WARNING: While MAME has very useful dip switch settings, many of them are listed in reverse order (ie: the settings are really for switches 8 down to 1 instead of 1 up to 8, or vice versa, or on really should be off and off really show be on. If you compare what is shown on the chart to the switch settings you already know, you should be able to figure it out. When available, please see manual)
1 | 2 | 3 | 4 | 5 | 6 | 7 | Function | Option |
---|---|---|---|---|---|---|---|---|
Off | Test Winner LED P1 | Off* | ||||||
On | On | |||||||
Off | Test Winner LED P2 | Off* | ||||||
On | On | |||||||
Off | Test 7-Segment P1 | Off* | ||||||
On | On | |||||||
Off | Test 7-Segment P2 | Off* | ||||||
On | On | |||||||
Off | Unknown | Off* | ||||||
On | On | |||||||
Off | Demo | On | ||||||
On | Off* | |||||||
Testmode | On | |||||||
Off* |
NOTE: Dip switch setting information is contributed by the community and although is believed to be correct (most of the time), has not been tested or verified.
Use this information at your own risk.