Land Breaker (World) / Miss Tang Ja Ru Gi (Korea) (pcb ver 3.03) (AT89c52 protected) Dip Switch Settings
Below are the dip-switch found in MAME for this Land Breaker (World) / Miss Tang Ja Ru Gi (Korea) (pcb ver 3.03) (AT89c52 protected) romset.
WARNING: While MAME has very useful dip switch settings, many of them are listed in reverse order (ie: the settings are really for switches 8 down to 1 instead of 1 up to 8, or vice versa, or on really should be off and off really show be on. If you compare what is shown on the chart to the switch settings you already know, you should be able to figure it out. When available, please see manual)
Dip Switch: SW3 (DSW1)
| 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | Function | Option |
|---|---|---|---|---|---|---|---|---|---|
| Off | Service Mode | Off* | |||||||
| On | On | ||||||||
| Off | Show Counters | Off* | |||||||
| On | On |
Dip Switch: SW4 (DSW1)
| 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | Function | Option |
|---|---|---|---|---|---|---|---|---|---|
| Off | Service Mode | Off* | |||||||
| On | On | ||||||||
| Off | Show Counters | Off* | |||||||
| On | On |
NOTE: Dip switch setting information is contributed by the community and although is believed to be correct (most of the time), has not been tested or verified.
Use this information at your own risk.