Gaplus (Tecfri PCB) Dip Switch Settings

Below are the dip-switch found in MAME for this Gaplus (Tecfri PCB) romset.

WARNING: While MAME has very useful dip switch settings, many of them are listed in reverse order (ie: the settings are really for switches 8 down to 1 instead of 1 up to 8, or vice versa, or on really should be off and off really show be on. If you compare what is shown on the chart to the switch settings you already know, you should be able to figure it out. When available, please see manual)

Dip Switch: SW1 (DSWA_HIGH)

1	2	3	4	Function	Option
		Off	Off	Coin A	1 Coin/1 Credit*
		Off	On		1 Coin/2 Credits
		On	Off		2 Coins/1 Credit
		On	On		3 Coins/1 Credit
Off	Off			Lives	3*
Off	On				2
On	Off				4
On	On				5

Dip Switch: SW1 (DSWA_LOW)

1	2	4	Function	Option
Off			Coin B	1 Coin/1 Credit*
On				1 Coin/2 Credits
Off	On			2 Coins/1 Credit
On	On			3 Coins/1 Credit
			Demo Sounds	On*
		On		Off

Dip Switch: SW2 (DSWB_HIGH)

1	2	3	4	Function	Option
	Off	Off	Off	Difficulty	0 - Standard*
	Off	Off	On		1 - Easiest
	Off	On	Off		2
	Off	On	On		3
	On	Off	Off		4
	On	Off	On		5
	On	On	Off		6
	On	On	On		7 - Hardest
Off				Unknown	Off*
On					On

Dip Switch: SW2 (DSWB_LOW)

1	2	3	4	Function	Option
Off				Bonus Life	100k 300k and every 600k
On					150k 400k
Off	On				150k 400k and every 900k
On	On				100k 300k and every 300k
Off	Off	On			50k 200k and every 300k
On	Off	On			50k 150k and every 600k
Off	On	On			50k 150k and every 300k
On	On	On			30k 150k and every 600k*
				Round Advance	Off*
			On		On

NOTE: Dip switch setting information is contributed by the community and although is believed to be correct (most of the time), has not been tested or verified.

Use this information at your own risk.