Below are the specific dip-switch settings users have contributed for Tron:
------------------------------------------------------------------------------- OPTION SWITCH SETTINGS ------------------------------------------------------------------------------- ------------------------------------------------------------------------------- /////////// SWITCH NO. 1 - AT B3 - LOCATED ON SOUND I/O P.C. BOARD //////////// ------------------------------------------------------------------------------- | SW#1 SW#2 SW#3 SW#4 SW#5 SW#6 SW#7 SW#8 SW#9 SW#10 |--------------------------------------------------- 2 COIN METERS | ON NOT NOT NOT NOT NOT NOT 1 COIN METER | OFF USED USED USED USED USED USED ---------------------------|--------------------------------------------------- MINI / UPRIGHT | ON COCKTAIL TABLE | OFF ---------------------------|--------------------------------------------------- BUY IN ALLOWED | ON NO BUY IN | OFF ---------------------------|--------------------------------------------------- FREEZE VIDEO | ON NORMAL OPERATION | OFF ------------------------------------------------------------------------------- ------------------------------------------------------------------------------- /////////// SWITCH NO. 3 - AT D14 - LOCATED ON SOUND I/O P.C. BOARD /////////// ------------------------------------------------------------------------------- ------------------------------------------------------------------------------- | SW#1 **SW#2 **SW#3 **SW#4 |--------------------------- NORMAL OPERATION | OFF SOUND I/O DIAGNOSTIC MODE | ON -----------------------------|------------------------------------------------- NORMAL OPERATION | OFF RAM/ROM TEST | ON INDICATES TEST RESULTS VIA | YELLOW L E D ON SOUND I/O | BOARD: FAST FLASH = BAD ROM | SLOW FLASH = BAD RAM | -----------------------------|------------------------------------------------- NORMAL OPERATION | OFF OSCILLATOR TEST | ON -----------------------------|------------------------------------------------- NORMAL OPERATION | OFF FILTER TEST | ON ------------------------------------------------------------------------------- ** NO EFFECT IF SW#1 OR SWITCH NO. 3 IS IN THE "OFF" POSITION. THE REMAINDER OR TRON'S MOST COMMON OPTION SETTINGS ARE CONDUCTED DURING THE MACHINE SETUP PORTION OF THE SELF-TEST MODE. SIMPLY FOLLOW THE ON-SCREEN INSTRUCTIONS TO MAKE ANY ADJUSTMENTS YOU FEEL ARE NECESSARY.
NOTE: Dip switch setting information is contributed by the community and although is believed to be correct (most of the time), has not been tested or verified.
Use this information at your own risk.
Official dip switch information may be available in the manual: