Spy Hunter Dip Switch Settings

Below are the specific dip-switch settings users have contributed for Spy Hunter:

            SPY HUNTER SW. SETTINGS
=======================

DIP SW. 1 (@ B3 on Sound I/O board)
-----------------------------------

sw 1-9:  Not used
sw 10:   0 = Norm. operation
         1 = Freeze video

DIP SW. 3 (@ D14 on Sound I/O board)
------------------------------------

sw 1:   1 = sound i/o diagnostic mode
        0 = normal mode
sw 2:   1 = RAM/ROM test mode
        0 = normal mode
sw 3:   1 = oscillator test mode
        0 = normal mode
sw 4:   1 = filter test mode
        0 = normal mode

Note: - if sw 1 is 0, all other switches are ineffective.
      - during RAM/ROM test, "fast" yellow LED flash = bad ROM,
        "slow" = bad RAM
      - for other settings, see self-test mode.

NOTE: Dip switch setting information is contributed by the community and although is believed to be correct (most of the time), has not been tested or verified.
Use this information at your own risk.

Official dip switch information may be available in the manual:

Spy Hunter Dip Switch Settings

Manuals