Spelunker II Dip Switch Settings
Below are the specific dip-switch settings users have contributed for Spelunker II:
Dip sw.1
-------- 1 2 3 4 5 6 7 8
-----------------------------------------------------------
- -
+ -
- +
+ +
Player + - 4
- + 5
- - 3
+ + 6
Coin Mode 2, Dip sw. 2-3=ON
Coin A - - 1Coin/1Play
+ - 2Coin/1Play
- + 3Coin/1Play
+ + 5Coin/1Play
Coin B - - 1Coin/1Play
+ - 1Coin/3Play
- + 1Coin/5Play
+ + 1Coin/6Play
Coin Mode 1, Dip sw. 2-3=OFF
- - - - 1Coin/1Play
+ - - - 2Coin/1Play
- + - - 3Coin/1Play
+ + - - 4Coin/1Play
- - + - 5Coin/1Play
+ - + - 6Coin/1Play
- + + - 1Coin/2Play
+ + + - 1Coin/3Play
- - - + 1Coin/4Play
+ - - + 1Coin/5Play
- + - + 1Coin/6Play
+ + - + 2Coin/3Play
- - + + 3Coin/2Play
+ - + + 5Coin/3Play
- + + + 8Coin/3Play
+ + + + Free Play
Dip sw.2
-------- 1 2 3 4 5 6 7 8
-----------------------------------------------------------
Screen - Normal
+ Reverse
Type - Table
+ Upright
Coin Mode - Mode 1
+ Mode 2
Continue - Yes
+ No
Freeze Picture - No
+ Yes
Move Picture Back - No
and Forth + Yes
No Hit - No
+ Yes
Test Mode - No
+ Yes
NOTE: Dip switch setting information is contributed by the community and although is believed to be correct (most of the time), has not been tested or verified.
Use this information at your own risk.
Official dip switch information may be available in the manual: